[Elecraft] Adding the KPA500 with the KAT3 installed

[Hank P]

Don't forget with the KANT3 you have choice of two TX antennas -- just put 
it in bupass and away you go .

The KAT you only have one TX ant .

I can run a higher power amp by moving one coax  switch to one or the other 
amp .

Hank K7HP

-----Original Message----- 
From: Rick WA6NHC
Sent: Thursday, February 19, 2015 6:01 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Adding the KPA500 with the KAT3 installed

Bypass it.

I believe in multiple redundancies for critical parts (except amps, too
expensive).  Besides I may choose to put the K3 in the RV one of these
days and with the KANT3 in it, it's ready to go.

73,
Rick wa6nhc

On 2/19/2015 4:33 PM, Harry Yingst via Elecraft wrote:
> I was wondering what others do when they add the KPA500 and they have the 
> KAT3.
> Do most just bypass it , or remove it and put the KANT3 module back in?
> Thank you

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pfizenmayer at q.com