[Elecraft] K3 Beta 5r10 and LINK

[N2TK, Tony]

Hi Arie,
I am not sure I understand what LINK does to help when both receivers are on
the same freq. What does F9-F12 below do to help?
Tnx
N2TK, Tony

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Arie
Kleingeld PA3A
Sent: Sunday, February 15, 2015 9:48 AM
To: elecraft at mailman.qth.net; Wayne Burdick
Subject: [Elecraft] K3 Beta 5r10 and LINK

Wayne,

Please do not take out LINK. I'm using it a lot in contests and in
DXpedition work

Just to give you and others the idea:
With both main and sub RX's on the same freq, mode  and BW  I link them with
LINK.
But here comes the fun part. When working with the N1MM logger I use
F9-F12 to quickly command the audio from the K3 main and sub:
- F9 = listen A-B
- F10 = listen A-A
- F11 = listen B-B
- F12 contains the commands to copy VFO freq and mode from A to B and LINK
the VFO's.

This unique flexibility of the K3 is impossible in the DIVERSITY mode.
so P L E A S E , keep LINK in there.

73
Arie PA3A

Wayne Burdick schreef op 15-2-2015 om 5:04:
> Mike (et al),
>
> It's beta, experimental, subject to further revision. We took the original
dual-PB out based on earlier feedback suggesting no one was using it (same
with LINK). APF, in contrast, has been hugely popular. But with this input,
we'll reconsider.
>
> Thanks,
> Wayne
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to tony.kaz at verizon.net