[Elecraft] KSYN3A - installation question

[Wayne Burdick]

Definitely. I believe that's in the instructions.

Wayne
N6KR

On Feb 14, 2015, at 11:32 AM, Harry Yingst via Elecraft <elecraft at mailman.qth.net> wrote:

> I found that installing the sub reciever is a lot easier with the handle side of the K3 removed.
> 
> 
> 
> 
>      From: "Dauer, Edward" <edauer at law.du.edu>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
> Sent: Saturday, February 14, 2015 10:03 AM
> Subject: [Elecraft] KSYN3A - installation question
> 
> 
> First question that came to my mind when I saw the announcement was
> whether the KRX3 had to be removed and reinstalled in order to replace the
> synths.  I found installing the KRX3 exasperating when I assembled the K3
> - success came on about the 12th try.
> 
> My K3 is 100 miles from where I am right now, so I looked at the photos in
> the K3 assembly manual and those in the new synth instructions, from which
> it appears that the swap could be done without removing the KRX3.  Could
> we confirm whether R&R is required?  Message below says it is.
> 
> If the sub does have to be R&R¹d, anyone have suggestions about how to
> reinstall it without the major fuss I experienced?
> 
> 
> Ted, KN1CBR
> 
> 
>> 
>> ------------------------------
>> 
>> Date: Fri, 13 Feb 2015 13:21:20 -0800
>> From: Richard Thorpe <kissov29 at gmail.com>
>> To: Elecraft List <elecraft at mailman.qth.net>
>> Subject: [Elecraft] More KSYN3A
>> Message-ID: <92F46418-CAAB-45A6-BFCD-F87860378242 at gmail.com>
>> Content-Type: text/plain; charset=utf-8
>> 
>> I talked to Elecraft and you must remove the second receiver not just
>> unplug it and remove its ?old? synth board.  . . .
>> 
>> R Thorpe K6CG
>> 
>> ------------------------------
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hlyingst at yahoo.com
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com