[Elecraft] P3 Beta SVGA Inop

[Jim Miller]

I reloaded the current non-beta version. Not having P3 working is not worth
playing with betas.

jim ab3cv

On Tue, Feb 3, 2015 at 1:52 AM, Gerald Manthey <kc6cnn at gmail.com> wrote:

> I could not use the latest beta either. I had to go one beta back.
> Gerald KC6CNN
> On Feb 2, 2015 7:46 PM, "Jim Miller" <jim at jtmiller.com> wrote:
>
>> Decided to try the latest beta P3 firmware. All loaded including FPGA.
>>
>> SVGA output is frozen and P3 is updating very slowly.
>>
>> When I turn the SVGA display enable off the P3 behaves "normally" with a
>> proper update rate.
>>
>> I've removed power from the P3 completely and restarted it with no
>> improvement.
>>
>> Is there something else I need to do?
>>
>> It was working well before this.
>>
>> jim ab3cv
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kc6cnn at gmail.com
>>
>