[Elecraft] Any good/clear "How To" docs on adding the N1MM+ software for Winkey usb smt to my k3+p3 station for windows 7?

[Jim Brown]

On Mon,2/2/2015 1:47 PM, Phil Anderson wrote:
> However, I'm finding the documentation for integrating N1MM+ the my 
> Dell system 7.0 and keyer with the K3/P3 a bit much. 

The N1MM+ install is pretty straightforward, and usually goes pretty 
easily. You must first do the basic install, then reboot and install the 
latest version.

When you start N1MM+, it will ask for your call, name, and other vital 
info. Once that's done, go to Config Tab, select the top option, and 
plug in the info for what serial port your rig is on. If you're using a 
USB to serial converter, you'll have to use Control Panel to figure out 
what serial port it is on. You will also need to know what serial port 
the WinKey has been assigned to.

Go to this link, click on Documents, then study Getting Started.

http://n1mm.hamdocs.com/tiki-index.php?page=Document+Home

As with any serial control, make sure that the computer and the radio 
are set to the same Baud Rate (Long Push Menu on the K3, Configure for 
the port in N1MM+). 38400 is the best choice.

N1MM+ is very user friendly, very well written. Join the email reflector 
for excellent support.

73, Jim K9YC