[Elecraft] VOX / PTT combination on k3

[Mike K2MK]

Hi Robert,

If you are using VOX there should be no difference in the delay between
using your paddle and using your PC. It sounds like N1MM is still sending a
PTT command over the serial link. You can prove this by changing
CONFIG:PTT-KEY to OFF-OFF on your K3.

73,
Mike K2MK


s57aw wrote
> Hi,
> 
> Simple question... Is there a way to avoid VOX delay on CW mode when PTT
> is
> used?
> 
> To be more concrete:
> 
> - CW and PTT signal are sent to K3 with N1MM directly from serial port (no
> external keyer)
> - external electronic keyer is connected to K3
> - VOX is enabled
> 
> If I want CW keyer to work without PTT / paddle then VOX has to be
> enabled,
> but VOX brings unwanted delay at the end when CW is sent from PC.
> 
> 73 Robert, S57AW





--
View this message in context: http://elecraft.365791.n2.nabble.com/VOX-PTT-combination-on-k3-tp7611619p7611620.html
Sent from the Elecraft mailing list archive at Nabble.com.