[Elecraft] VOX / PTT combination on k3

[Robert Bajuk]

Hi,

Simple question... Is there a way to avoid VOX delay on CW mode when PTT is
used?

To be more concrete:

- CW and PTT signal are sent to K3 with N1MM directly from serial port (no
external keyer)
- external electronic keyer is connected to K3
- VOX is enabled

If I want CW keyer to work without PTT / paddle then VOX has to be enabled,
but VOX brings unwanted delay at the end when CW is sent from PC.

73 Robert, S57AW