[Elecraft] Multiple KUSB Connects

[Jim Rogers]

No problem here with my Timewave Navigator which is a 6 port USB hub to 
CAT, PTT, FSK, WinKeyer, Config, and an fully configured RS232 which 
connects to my KPA500. Cheaper USB hubs, Logitech etc. exhibit RF 
sensitivity but then all of my antennas are in the attic as I live in a 
CC&R subdivision.

Jim, W4ATK


On 8/24/2015 8:57 PM, David Ahrendts wrote:
> In a multiple Elecraft device station, I’m curious if anyone connects all KUSBs to a USB hub semi-permanently so that when you need a connection you already have that hardware access? Realizing you cannot run two Utility programs simultaneously (at least I haven’t had success with that), what is your setup? I have attempted with a USB hub into a Mac Mini with marginal success. Please opine.
>
> David A., KC0XT
>
>
>
> David Ahrendts   davidahrendts at me.com
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim.w4atk at gmail.com