[Elecraft] Multiple KUSB Connects

[Kenneth Christiansen]

 Hi to the group again
I have a USB hub with a USB to rs232 for my K3 and another for my KX3. I have never tried to run both at the same time but they have both been on the same hub for 2 years and they always work, Port 4 for one, Port  7 for the other and Port 5 for the WinKeyer USB which I know works at the same time as the KX3.

Again hope I did not waste band width but thought my experiance would help.

73

Ken W0CZ   w0cz at i29 dot net

Sent from my iPad

> On Aug 24, 2015, at 8:57 PM, David Ahrendts <davidahrendts at me.com> wrote:
> 
> In a multiple Elecraft device station, I’m curious if anyone connects all KUSBs to a USB hub semi-permanently so that when you need a connection you already have that hardware access? Realizing you cannot run two Utility programs simultaneously (at least I haven’t had success with that), what is your setup? I have attempted with a USB hub into a Mac Mini with marginal success. Please opine.
> 
> David A., KC0XT
> 
> 
> 
> David Ahrendts   davidahrendts at me.com   
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wocz at i29.net