[Elecraft] K3 TX calibration fails after KXV3B and SYN3A upgrade

[Doug Turnbull]

David,
    I had a similar problem here with a friend's K3 (I have two K3(s) with
second receivers installed and had no problem prior to doing this
synthesizer board swap.)    We solved the failure to TX calibrate by
reloading the K3 Utility - the same one which worked fine previously.
Reloading the utility is an easy thing to try.

                    73 Doug EI2CN
-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave
G3WGN M6O
Sent: 16 August 2015 10:39
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 TX calibration fails after KXV3B and SYN3A upgrade

I'm hoping there is a quick fix for this (some fat-fingering or brain fade
on
my part is entirely possible) as the K3 in question is one of four heading
to E6GG next month. 
Yesterday I upgraded S/N 4474 with KXV3B and 2 x SYN3As and while the panels
were off, also did the 12V DC Out mod and gold connector replacement mod.  I
have a full ESD bench and wore a wrist strap at all times.  
After careful reassembly and TMP cable checks, I was able to update to
latest firmware and enable synths and KXV3B.  But TX Calibration failed with
Calibration power settled at "   0W; " message.
I have tried the following remedies:
Panels off and examined all boards for correct seating.
Examined all TMP cables for correct seating.
Replaced panels.
Re-attempted Calibration - same error.
Re-flashed the firmware load.  Load successful.
Re-attempted Calibration - same error.
Performed EE INIT
Loaded a known-good prior configuration (from March 2015 well before the
upgrade)
Re-attempted Calibration - same error.

Any suggestions for next steps gratefully received!
73
David G3WGN WJ6O



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and
-SYN3A-upgrade-tp7606337.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to turnbull at net1.ie