[Elecraft] [SPAM?] Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
Dave G3WGN M6O
david at aslinvc.com
Sun Aug 16 07:36:34 EDT 2015
Will do.
David
From: Udo Langenohl - DK5YA [via Elecraft] [mailto:ml-node+s365791n7606342h73 at n2.nabble.com]
Sent: 16 August 2015 12:29
To: David Aslin G3WGN <david at aslinvc.com>
Subject: Re: [SPAM?] Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
David,
please let the list know what Elecraft says.
73 Udo
Am 16.08.2015 um 13:20 schrieb Dave G3WGN M6O:
> Thanks. Time to talk to Elecraft, I think!
> 73, David
>
> From: Udo Langenohl - DK5YA [via Elecraft] [mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606342&i=0>]
> Sent: 16 August 2015 12:11
> To: David Aslin G3WGN <[hidden email]</user/SendEmail.jtp?type=node&node=7606342&i=1>>
> Subject: Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
>
> David,
>
> exactly the same here.
>
> Udo, DK5YA
>
> Am 16.08.2015 um 13:01 schrieb Dave G3WGN M6O:
>
>> Thanks Udo.
>> Did you have RF out while the KXV3B was installed? I get no RF either below or above the 12Watt PA changeover point setting on the PWR control.
>> 73, David
>>
>> From: Udo Langenohl - DK5YA [via Elecraft] [mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606340&i=0>]
>> Sent: 16 August 2015 11:58
>> To: David Aslin G3WGN <[hidden email]</user/SendEmail.jtp?type=node&node=7606340&i=1>>
>> Subject: Re: [SPAM?] K3 TX calibration fails after KXV3B and SYN3A upgrade
>>
>> David,
>>
>> so did I in June, replaced KXV3-A by KXV3-B, TX calibration always
>> failed. Tried several times: back to KXV3-A, calibration works, again to
>> KXV3-B, calibration failed. Checked TMP's a hundred times, no fail for
>> sure. I didn't replace the SYN-boards.
>> I finally gave up after 1 week of constant dissapointment. Still running
>> old KXV3-A, have a KXV3-B for sale now.
>> Rig: K3 ser. 59xx, ESD workbench.
>>
>> 73 Udo, DK5YA
>>
>> Am 16.08.2015 um 12:38 schrieb Dave G3WGN M6O:
>>
>>> I'm hoping there is a quick fix for this (some fat-fingering or brain fade on
>>> my part is entirely possible) as the K3 in question is one of four heading
>>> to E6GG next month.
>>> Yesterday I upgraded S/N 4474 with KXV3B and 2 x SYN3As and while the panels
>>> were off, also did the 12V DC Out mod and gold connector replacement mod. I
>>> have a full ESD bench and wore a wrist strap at all times.
>>> After careful reassembly and TMP cable checks, I was able to update to
>>> latest firmware and enable synths and KXV3B. But TX Calibration failed with
>>> Calibration power settled at " 0W; " message.
>>> I have tried the following remedies:
>>> Panels off and examined all boards for correct seating.
>>> Examined all TMP cables for correct seating.
>>> Replaced panels.
>>> Re-attempted Calibration - same error.
>>> Re-flashed the firmware load. Load successful.
>>> Re-attempted Calibration - same error.
>>> Performed EE INIT
>>> Loaded a known-good prior configuration (from March 2015 well before the
>>> upgrade)
>>> Re-attempted Calibration - same error.
>>>
>>> Any suggestions for next steps gratefully received!
>>> 73
>>> David G3WGN WJ6O
>>>
>>>
>>>
>>> --
>>> View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337.html
>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606338&i=0>
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]</user/SendEmail.jtp?type=node&node=7606338&i=1>
>>>
>>
>> --
>> ******************************************
>> Webs by DK5YA: *
>> http://www.mmmonvhf.de/ [editor]*
>> http://www.vhfdx.de/ [owner] *
>> http://www.palekastro.de/ [owner] *
>> http://www.solweb.de/ [owner] *
>> http://www.spessartwetter.de/ [owner] *
>> ******************************************
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606338&i=2>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]</user/SendEmail.jtp?type=node&node=7606338&i=3>
>>
>> ________________________________
>> If you reply to this email, your message will be added to the discussion below:
>> http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606338.html
>> To unsubscribe from K3 TX calibration fails after KXV3B and SYN3A upgrade, click here<
>> NAML<http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>>
>>
>>
>>
>> --
>> View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606339.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606340&i=2>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]</user/SendEmail.jtp?type=node&node=7606340&i=3>
>>
>
> --
> ******************************************
> Webs by DK5YA: *
> http://www.mmmonvhf.de/ [editor]*
> http://www.vhfdx.de/ [owner] *
> http://www.palekastro.de/ [owner] *
> http://www.solweb.de/ [owner] *
> http://www.spessartwetter.de/ [owner] *
> ******************************************
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606340&i=4>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]</user/SendEmail.jtp?type=node&node=7606340&i=5>
>
> ________________________________
> If you reply to this email, your message will be added to the discussion below:
> http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606340.html
> To unsubscribe from K3 TX calibration fails after KXV3B and SYN3A upgrade, click here<
> NAML<http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606341.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606342&i=2>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]</user/SendEmail.jtp?type=node&node=7606342&i=3>
>
--
******************************************
Webs by DK5YA: *
http://www.mmmonvhf.de/ [editor]*
http://www.vhfdx.de/ [owner] *
http://www.palekastro.de/ [owner] *
http://www.solweb.de/ [owner] *
http://www.spessartwetter.de/ [owner] *
******************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]</user/SendEmail.jtp?type=node&node=7606342&i=4>
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]</user/SendEmail.jtp?type=node&node=7606342&i=5>
________________________________
If you reply to this email, your message will be added to the discussion below:
http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606342.html
To unsubscribe from K3 TX calibration fails after KXV3B and SYN3A upgrade, click here<http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=7606337&code=ZGF2aWRAYXNsaW52Yy5jb218NzYwNjMzN3wxMDk4MzMzNTEz>.
NAML<http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-TX-calibration-fails-after-KXV3B-and-SYN3A-upgrade-tp7606337p7606343.html
Sent from the Elecraft mailing list archive at Nabble.com.
More information about the Elecraft
mailing list