[Elecraft] RTTY on the K3S

[Richard Ferch]

Following up on Salvo's post: Rich, I believe you said you are using 
N1MM+. If that is the case, open the N1MM+ Configurer, select the Mode 
Control tab, and on the right side, look to see what is selected for 
"Mode sent to radio" for RTTY. If this is set to RTTY, N1MM+ will put 
the K3S into FSK D mode, which will result in an unmodulated carrier if 
there is nothing connected to the FSK pin on the AUX connector on the 
K3S. To use AFSK A, change the "Mode sent to radio" to AFSK.

73,
Rich VE3KI


IW1AYD wrote:

> UR radio is FSK, UR computer is AFSK. Isn't?
>
> I would double check the Radio SubMode