[Elecraft] K3 fixed TX audio from the monitor

[Peter]

Ed

Line out has only RX fixed audio level settings.
TX audio is per TX monitor setting and by operator prefference .

In worse case, some one don't like any feedback in SSB and you wil find 
a blank recoring during TX

73 Peter, PC22

elecraft-request at mailman.qth.net schreef op 09/08/2015 17:59:
> Use Line Out. 
     73, Ed W0YK On Aug 9, 2015 4:55 AM, Peter <pc2a at pi4cc.nl> wrote:
>> Hi
>>
>> A long standing wish is to get fixed level audio out from the audio
>> monitor for the K3
>> Some operators don't like there voice hearing and turn of the? audio
>> monitor low or off.
>> Result is a blank or weak? TX audio in the recording.
>> Seehttp://mailman.qth.net/pipermail/elecraft/2009-January/102536.html  
>> The RX part is done a long time a go but till now no solution for the?
>> TX part.
>>
>> With the new rule of audio recording for the upcomming CQWW it pops up
>> again and I like to ask if its possible to add a fixed audio level
>> output for TX
>>
>> Fromhttp://www.cqww.com/rules.htm  
>> *C. Audio Recordings:* Any single operator entrant (see V.A.1) competing
>> for a top three finish at the (a) World, (b) Continent, or (c) USA
>> levels, must record the transmitted and received audio as heard by the
>> operator for the duration of the contest operation.
>>
>> Are we not al winners in some kind of catagory?  
>>
>> Peter
>> PC2A
>