[Elecraft] K3 fixed TX audio from the monitor

[Ed Muns]

Use Line Out.

73,
Ed W0YK
On Aug 9, 2015 4:55 AM, Peter <pc2a at pi4cc.nl> wrote:
>
> Hi 
>
> A long standing wish is to get fixed level audio out from the audio 
> monitor for the K3 
> Some operators don't like there voice hearing and turn of the  audio 
> monitor low or off. 
> Result is a blank or weak  TX audio in the recording. 
> See http://mailman.qth.net/pipermail/elecraft/2009-January/102536.html 
> The RX part is done a long time a go but till now no solution for the  
> TX part. 
>
> With the new rule of audio recording for the upcomming CQWW it pops up 
> again and I like to ask if its possible to add a fixed audio level 
> output for TX 
>
> From http://www.cqww.com/rules.htm 
> *C. Audio Recordings:* Any single operator entrant (see V.A.1) competing 
> for a top three finish at the (a) World, (b) Continent, or (c) USA 
> levels, must record the transmitted and received audio as heard by the 
> operator for the duration of the contest operation. 
>
> Are we not al winners in some kind of catagory? :-) 
>
> Peter 
> PC2A 
>
>
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft at mailman.qth.net 
>
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> Message delivered to ed at w0yk.com