[Elecraft] Linked VFO's -- usage?

[Arie Kleingeld PA3A]

Don,

I know what diversity is Don, and I use it as you describe.
It just happens that I sometimes need to concentrate on one channel only 
to make the QSO. That's where the A-A en b-b come into play. After 
finishing and logging the QSO,  I switch the K3 back into A-b with one 
simple keystroke F9.


73
Arie


Don Wilhelm schreef op 3-8-2015 om 17:05:
> Arie,
>
> The K3 may be in diversity, but you will only hear in diversity mode 
> when the audio is A-b.
> The diversity effect is 'in your head' as your ears naturally pick up 
> the differences between the two receivers and your brain figures out 
> which is the best to hear.
>
> When you have the audio set to A-A or b-b, you are hearing the audio 
> from only one receiver, and by definition, that is not diversity 
> reception.
>
> 73,
> Don W3FPR
>
> On 8/3/2015 10:30 AM, Arie Kleingeld PA3A wrote:
>> Don,
>>
>> to set things up, I use a macro programmed in the F12-key in N1MM to 
>> copy the freq/mode/BW  From A to B,  switch on the SubRx, set audio 
>> to A-b listening and Link the VFO's. Switching of the audio is done 
>> in F9-F10-11 to A-b, A-A, or b-b respectively.
>>
>> Of course I would like that I could switch the audio when the K3 is 
>> in diversity mode, but That cannot be done in current Firmware. In 
>> diversity the audio is fixed to A-b.
>>
>
>