[Elecraft] Linked VFO's -- usage?

[Vic Rosenthal 4X6GP/K2VCO]

What I do is switch antenna connections. My secondary antenna is 
connected to both the RX ANT and the sub's BNC input. So I can listen to 
the main + secondary antennas in diversity mode, just the main antenna 
with diversity off, or just the secondary antenna (regardless of whether 
diversity is on or off) with the RX ANT switch on.

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 2 Aug 2015 17:34, Arie Kleingeld PA3A wrote:
> Hi all,
>
> I might be one of few people who use the Linked VFO's in diversity, not
> that I want to, but because I have to.
>
> When listening to diversity I am stuck with the L-MIX-R setting to A-b.
> Some times I want to switch from A-b to  A-A   or   b-b  and back again.
> It is used when I need to listen to only one antenna because of very
> weak signal or QRM via the other antenna to my other ear.
> This switching cannot be done when the K3 is in diversity mode, which is
> a pity. That's why I Link the VFO's. (All done with computer macro
> commands of course).
>
> It's probably not on the list for this to come in the firmware. It's
> seems to be only Arie (me) that would appreciate the audio switching in
> diversity :-)
> The K3 is a very flexible radio, but not at this. If I only could switch
> the audio when the radio is in diversity via a macro, that would be
> enough. (Does not need to be from a front side button)
>
> 73
> Arie PA3A