[Elecraft] Linked VFO's -- usage?

[Don Wilhelm]

Arie,

The K3 may be in diversity, but you will only hear in diversity mode 
when the audio is A-b.
The diversity effect is 'in your head' as your ears naturally pick up 
the differences between the two receivers and your brain figures out 
which is the best to hear.

When you have the audio set to A-A or b-b, you are hearing the audio 
from only one receiver, and by definition, that is not diversity reception.

73,
Don W3FPR

On 8/3/2015 10:30 AM, Arie Kleingeld PA3A wrote:
> Don,
>
> to set things up, I use a macro programmed in the F12-key in N1MM to 
> copy the freq/mode/BW  From A to B,  switch on the SubRx, set audio to 
> A-b listening and Link the VFO's. Switching of the audio is done in 
> F9-F10-11 to A-b, A-A, or b-b respectively.
>
> Of course I would like that I could switch the audio when the K3 is in 
> diversity mode, but That cannot be done in current Firmware. In 
> diversity the audio is fixed to A-b.
>