[Elecraft] K2 - computer interface PROBLEM SOLVED

[Poul Erik Karlshøj (PKA)]

Yes, I know
...
now :-)

Sent from my iPad

> On 29 Apr 2015, at 18:58, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> 
> Paul,
> 
> There should not be any damage with that cable connected the wrong way - but the connector with two cables needs to connect to the K2 if the RS-232 communications is to work.
> 
> 73,
> Don W3FPR
> 
>> On 4/29/2015 12:31 PM, Poul Erik Karlshøj (PKA) wrote:
>> PROBLEM SOLVED
>> 
>> Hi Don,
>> It was (of course) finger-trouble.
>> I had installed the cable the wrong way. The connectors to the K2 and KAT were interchanged - happily there seems not to be any damage.
>> Need to mark-up these cables!
>> 
>> 
>