[Elecraft] K2 - computer interface PROBLEM SOLVED

[Don Wilhelm]

Paul,

There should not be any damage with that cable connected the wrong way - 
but the connector with two cables needs to connect to the K2 if the 
RS-232 communications is to work.

73,
Don W3FPR

On 4/29/2015 12:31 PM, Poul Erik Karlshøj (PKA) wrote:
> PROBLEM SOLVED
>
> Hi Don,
> It was (of course) finger-trouble.
> I had installed the cable the wrong way. The connectors to the K2 and KAT were interchanged - happily there seems not to be any damage.
> Need to mark-up these cables!
>
>