[Elecraft] K3 TX all the time ISSUE

[Warren Merkel]

Since the radio isn't brain dead, it might be worth a try to reflash the latest firmware and power cycle the rig.  Then scroll through all the config settings and look for anything out of place.  Unplug anything on the AUX and serial ports to eliminate external issues.

Warren KD4Z
K3 #8902

On April 5, 2015 3:07:34 PM EDT, "sq5lnu ." <karol.goralski at gmail.com> wrote:
>Hello,
>
>My Dear friends. I have a strange problem with my K3.
>
>I noticed today some electrostatics from my antenna (high voltage from
>antenna cable).
>(My K3 was not grounded properly - my fault).
>After that my K3 started transmitting all the time. There is no key
>paddle
>connected…
>
>The only way to stop transmitting is to turn on K3 with touched paddle
>(KEY
>ERR).
>Has anyone had a similar issue?
>
>I will be grateful for your help!
>
>Best ragrds,
>
>(sorry for my english)
>
>Karol - SQ5LNU
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to hullspeed21 at gmail.com

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.