[Elecraft] K3 shift and lo/hi cut no longer working

[Wayne Burdick]

Hi Chris,

You probably turned on CW QRQ mode. See CONFIG:CW QRQ.

73,
Wayne
N6KR

On Apr 3, 2015, at 3:34 PM, Chris Hallinan <challinan at gmail.com> wrote:

> Hi folks,
> 
> Somehow I managed to get my K3 into some state where the shift function
> doesn't shift, and I'm unable to select the alternate functions of the
> shift and width knobs to hi/lo cut.
> 
> Mode CW, VFO-A, nothing unusual.  LEDs show Shift and Width functions
> enabled.
> 
> When I rotate Shift, the vfo-b display simply shows FC *0.48 (my pitch, the
> center of the passband.)  It does not shift.  Width control works.  I've
> power cycled, still no joy.  No software connected, either. Pressing each
> button does nothing.  (Should go to alternate mode, ie lo/hi cut.  Long
> pressing shift does normalize.  It's only the functions associated with the
> shift knob.
> 
> What gives?  What did I do wrong?
> 
> Chris
> K1AY
> 
> -- 
> Life is like Linux - it never stands still.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com