[Elecraft] Freq Editor req for update - allow entry of WX freqs

[Joe Subich, W4TV]

OK guys ... I get the message. The K3 is not able to tune Weather band.

73,

    ... Joe, W4TV


On 2014-09-20 9:10 PM, Matt Zilmer wrote:
> The KX3 with KX3-2M is able to tune frequencies in the range 120-168
> MHz.  See p53 of the owner's manual for the specs.
>
> 73,
> matt
> W6NIA
>
> On Sat, 20 Sep 2014 20:45:45 -0400, you wrote:
>
>> My understanding is that the KX3 (not the K3) _CAN_ tune the WX band for RX.
>> Bruce/N1RX
>>
>>> The K3/KX3 can't tune those frequencies ... even with the
>>> 2 meter transverters.  Those frequencies would be well above
>>> 30 MHz (IF limit).
>>
>> 73,
>>
>>     ... Joe, W4TV
>>
>>
>> On 2014-09-20 5:31 PM, Jeff Herr wrote:
>>> Would it be possible to get the k3/kx3 freq memory editor ver 1.3.3.0
>>> updated to allow entry of the NOAA weather channels?
>>>
>>> 162.400, .425, .450, .475, 162.500, .525, .550
>>>
>>> currently i get a little red exclamation mark error.
>>>
>>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to mzilmer at roadrunner.com
> Matt Zilmer, W6NIA
> --
> "Give me six hours to chop down a tree and I will
> spend the first four sharpening the axe." -A. Lincoln
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>