[Elecraft] Freq Editor req for update - allow entry of WX freqs

[Matt Zilmer]

The KX3 with KX3-2M is able to tune frequencies in the range 120-168
MHz.  See p53 of the owner's manual for the specs.

73,
matt
W6NIA

On Sat, 20 Sep 2014 20:45:45 -0400, you wrote:

>My understanding is that the KX3 (not the K3) _CAN_ tune the WX band for RX.
>Bruce/N1RX
> 
>> The K3/KX3 can't tune those frequencies ... even with the
>> 2 meter transverters.  Those frequencies would be well above
>> 30 MHz (IF limit).
> 
>73,
> 
>    ... Joe, W4TV
> 
> 
>On 2014-09-20 5:31 PM, Jeff Herr wrote:
>> Would it be possible to get the k3/kx3 freq memory editor ver 1.3.3.0
>> updated to allow entry of the NOAA weather channels?
>> 
>> 162.400, .425, .450, .475, 162.500, .525, .550
>> 
>> currently i get a little red exclamation mark error.
>> 
>> 
>
> 
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to mzilmer at roadrunner.com
Matt Zilmer, W6NIA
--
"Give me six hours to chop down a tree and I will
spend the first four sharpening the axe." -A. Lincoln