[Elecraft] CONFIG Question

[Ron Wetjen]

On 9/20/2014 4:24 AM, Michael Eberle wrote:

>  From the FW REVS screen, if rotate the VFO A knob clockwise a little,
> it should change to something like "d1 02.83" which is the DSP firmware
> revision.  I am curious if it will do this, but not change the frequency
> when you exit the menu.

No, turning either VFO A or VFO B doesn't change anything when in CONFIG 
mode.

Will try to take a look at the encoders later today and double check to 
see that they are installed correctly.