[Elecraft] K3: Rough audio with amp even using voice recorder- SOLVED

[Don Wilhelm]

The TXEQ settings for the KX3 are the same as for the K3.

73,
Don W3FPR

On 9/17/2014 9:16 PM, Walter Underwood wrote:
> For those of us with a KX3 instead of a K3, what would be the frequency cutoff for “three lowest bands”?
>
> wunder
> K6WRU
> CM87wj
> http://observer.wunderwood.org/
>
> On Sep 17, 2014, at 5:52 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
>
>> On Wed,9/17/2014 3:52 PM, Ignacy wrote:
>>> I also found by testing on the other radio that CM500 sounds very different
>>> close (bassy) and a bit apart (more balanced).
>> For most voices, a good starting point for TXEQ with the CM500 is to fully cut the lowest three bands, cut the 4th band about 6dB, leave all the others at 0 dB. Then get some critical signal reports from hams you trust to have good ears.
>>
>> 73, Jim K9YC
>> ______________________________________________________________
>>