[Elecraft] K3: Rough audio with amp even using voice recorder- SOLVED

[Walter Underwood]

For those of us with a KX3 instead of a K3, what would be the frequency cutoff for “three lowest bands”?

wunder
K6WRU
CM87wj
http://observer.wunderwood.org/

On Sep 17, 2014, at 5:52 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:

> On Wed,9/17/2014 3:52 PM, Ignacy wrote:
>> I also found by testing on the other radio that CM500 sounds very different
>> close (bassy) and a bit apart (more balanced).
> 
> For most voices, a good starting point for TXEQ with the CM500 is to fully cut the lowest three bands, cut the 4th band about 6dB, leave all the others at 0 dB. Then get some critical signal reports from hams you trust to have good ears.
> 
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org