[Elecraft] KX3

[Mike Murray]

Thanks to all who replied!  I reseated all cables and I believe the problem
is corrected.  I also downloaded the latest firmware just in case, so all's
well with the world.

Really starting to like this little rig!

73,
Mike - W0AG

On Fri, Sep 12, 2014 at 9:29 PM, Walter Underwood <wunder at wunderwood.org>
wrote:

> Open it up and reseat all the cables.
>
> This feels like the kind of flakiness that a poor cable connection causes.
>
> wunder
> K6WRU
> CM87wj
> http://observer.wunderwood.org/
>
> On Sep 12, 2014, at 6:55 PM, Mike Murray <w0agmike at gmail.com> wrote:
>
> > Just received an almost unused KX3 from a friend and seem to be having a
> > major problem.  When first turned on, all is well and everything
> functions
> > as expected.  After a time, it acts as though the VFO is locked and won't
> > change freq., even if I change bands.  It is not locked because I have
> > tapped the RATE button just to be sure, but still won't change frequency
> -
> > the last digit just blinks.  Powering down and restarting seems to work
> for
> > a while, but it eventually starts doing the same thing.
> >
> > I'm assuming it's OP error and would welcome any input as to what's going
> > on and how I prevent it.
> >
> > Mike - W0AG
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to wunder at wunderwood.org
>
>