[Elecraft] KX3

[Walter Underwood]

Open it up and reseat all the cables. 

This feels like the kind of flakiness that a poor cable connection causes.

wunder
K6WRU
CM87wj
http://observer.wunderwood.org/

On Sep 12, 2014, at 6:55 PM, Mike Murray <w0agmike at gmail.com> wrote:

> Just received an almost unused KX3 from a friend and seem to be having a
> major problem.  When first turned on, all is well and everything functions
> as expected.  After a time, it acts as though the VFO is locked and won't
> change freq., even if I change bands.  It is not locked because I have
> tapped the RATE button just to be sure, but still won't change frequency -
> the last digit just blinks.  Powering down and restarting seems to work for
> a while, but it eventually starts doing the same thing.
> 
> I'm assuming it's OP error and would welcome any input as to what's going
> on and how I prevent it.
> 
> Mike - W0AG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org