[Elecraft] 回覆︰ K2/10 to K2/100

[Johnny Siu]

Hello John,

If you don't need an integrated linear with the K2 in one enclosure, I would suggest you go for KXPA100.

This linear is not only fitted to the KX3 but also any other radios like K2.  It can be fitted with internal ATU KXAT3 if you wish.

On the other hand, if you don't need 100W power, you could consider the Hardrock HR50 (50w output with internal ATU as well) at a much lower price.

In fact, there are quite a few good choices.

73

Johnny VR2XMC
 

________________________________
 寄件人︰ John Fritze <fritzejohn at gmail.com>
收件人︰ elecraft at mailman.qth.net 
傳送日期︰ 2014年09月9日 (週二) 2:01 AM
主題︰ [Elecraft] K2/10 to K2/100
  

One of our K2s needs to be converted to a K2/100.  Looking over the
instructions I do not see where this is terribly difficult, but I do have a
couple of questions:

Both K2s are totally maxed out with all the options so there is no reason
to use one over the other.  If I add the KPA100 kit, will the 20 watt tuner
still be inside or does that need to be removed?  Will it still be
available to use if running less than 20 watts?

When I remove the battery, anyone have any idea how often I should put it
on the charger to maintain the pack?  Should the pack be unplugged for
storage?

This is a SOTA rig for my XYL and I think she will have an easier time with
100 watts and a Buddipole LIPO pack.  She is having a difficult time making
contacts QRP.

-- 
John Fritze Jr
K2QY
k2qy at arrl.net
ACACES president 2014
Albany County RACES Radio Officer
ARES ENY DEC Northern District
Hudson Div. Asst. Director
Twitter: @k2qy
401 261 4996 (cell)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vr2xmc at yahoo.com.hk