[Elecraft] K1 and Cumbria Designs X-Lock

[Don Wilhelm]

Phil,

Scroll down a bit and you will see the photos - unless you have 
something lacking in the .pdf viewer in your browser - in that case, 
download the link by right clicking and choose "save file as" then open 
it with Adobe Reader.

73,
Don W3FPR

On 10/17/2014 11:12 AM, Phil Wheeler wrote:
> Oh no -- I'm not yet done with my K1, it appears.
>
> I wondered why the pdf file below showed no photos with the mounting 
> of the board in the K1; then I read "For the time being it is working 
> perfectly while wrapped in bubble wrap!" :-)
>
> 73, Phil W7OX
>
> On 10/17/14, 7:21 AM, Don Wilhelm wrote:
>> Joe,
>>
>> I have not tried it, but Davbe G4AON has written a paper on his 
>> installation. You can see it at
>> http://www.cumbriadesigns.co.uk/images/X-Lock%20K1/X-Lock_K1.pdf.
>>
>> It looks straightforward enough to me.  I would think you would have 
>> to adjust the VFO range after installation, but that is easy enough 
>> to do, just change the turns spacing on L1.
>>
>> There are several reviews on eHam - 
>> http://www.eham.net/reviews/detail/8437
>>
>> 73,
>> Don W3FPR
>>
>> On 10/17/2014 9:48 AM, Joe W2KJ wrote:
>>> Howdy fellow Elecrafters.
>>>
>>> Would like to get in contact with anyone out there who has 
>>> interfaced a Cumbria Designs X-Lock VFO stabilizer with a K1.
>>>
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w7ox at socal.rr.com
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>