[Elecraft] K1 and Cumbria Designs X-Lock

[Phil Wheeler]

Oh no -- I'm not yet done with my K1, it appears.

I wondered why the pdf file below showed no photos 
with the mounting of the board in the K1; then I 
read "For the time being it is working perfectly 
while wrapped in bubble wrap!" :-)

73, Phil W7OX

On 10/17/14, 7:21 AM, Don Wilhelm wrote:
> Joe,
>
> I have not tried it, but Davbe G4AON has written 
> a paper on his installation. You can see it at
> http://www.cumbriadesigns.co.uk/images/X-Lock%20K1/X-Lock_K1.pdf. 
>
>
> It looks straightforward enough to me.  I would 
> think you would have to adjust the VFO range 
> after installation, but that is easy enough to 
> do, just change the turns spacing on L1.
>
> There are several reviews on eHam - 
> http://www.eham.net/reviews/detail/8437
>
> 73,
> Don W3FPR
>
> On 10/17/2014 9:48 AM, Joe W2KJ wrote:
>> Howdy fellow Elecrafters.
>>
>> Would like to get in contact with anyone out 
>> there who has interfaced a Cumbria Designs 
>> X-Lock VFO stabilizer with a K1.
>>
>>
>
> ______________________________________________________________ 
>
> Elecraft mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html
> Message delivered to w7ox at socal.rr.com
>