[Elecraft] [K3] Using NaP3 in AFSK A mode

[Barry LaZar]

Pete,
     I guess I don't understand. I use NaP3 and PSK31 without a problem. 
I may not understand how you are configured. I use either DM780 or 
FLDIGI and spot my signals on that and click in that window for a 
signal. I do not use NaP3 or the KX3 for demodulation or decoding of any 
of my digital signals. I think most of us are doing this. I, therefore, 
do not have a problem.

     Another issue I sense in this thread is possibly going to cause 
some real problems. The tuning issue is not simple. The offsets will be 
different for differing digital signals. One signal may want a 1200 Hz 
offset while another may want 1800 Hz, etc.  A single Data A offset 
wouldn't work; it would need to b signal specific. I don't consider this 
a bug in either NaP3 or the KX3. It's just the nature of the various 
signals we play with. Here is a site the shows  a configuration that 
will work:


https://sdrzone.com/index.php?option=com_content&view=article&id=92:kx3-sdr-review&catid=20:mosaics&Itemid=572

73,
Barry
K3NDM


On 10/3/2014 8:49 AM, Pete Smith N4ZR wrote:
> I just confirmed that offsets in the latest NaP3 setup menu have no 
> effect when in AFSK A.  As someone reported, either here or elsewhere, 
> this is apparently a bug in NaP3, and since NaP3 is no longer 
> supported I'll have to find another solution.  Too bad - it was *so* 
> close to perfect.
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at
> http://reversebeacon.net,
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite
> ARC V6 or VE7CC DX cluster node.
>
> On 10/2/2014 2:58 PM, Pete Smith N4ZR wrote:
>> I would like to be able to use my K3 with NaP3 through an LP-PAN, but 
>> when I click on a signal, instead of going where clicked it sends the 
>> VFO to a frequency approximately 2 KHz lower.  I presume it may be 
>> going to the suppressed carrier frequency instead of the Mark 
>> frequency. Both NaP3 and the K3 are in AFSK A mode.
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k3ndm at comcast.net
>