[Elecraft] K3 Eqalizer settings - another way

[Tom Blahovici]

H
Yes that will work too as long as you run it stand alone. Injecting that command set during polling in a multithreaded  app, needs careful checking to ensure that the right response occurs. Timing is a issue here. 
73's Tom

On Oct 2, 2014 11:44 AM, dl2ki <dl2ki at online.de> wrote:
>
> Hi, 
>
> when working with the "DS response string", i found an easier and faster 
> method to read the values from the equalizer. 
>
> If you select an AF-band in the RX/TX EQ menu, the set value appears briefly 
> in the VFO-B display area. 
> This value can be read out with the "DB command" then. 
>
> The "SWTxx;" command and the "DB;" command must be carried out in quick 
> succession. 
>
> In the 'Elecraft K3 utility", you can for example run a macro"SWT34; DB;" 
> and then receive the related response string. 
>
> This note for general information. 
>
> 73, Wolfgang 
> DL2KI 
>
>
>
>
>
>
> -- 
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Eqalizer-settings-tp7593506p7593551.html 
> Sent from the Elecraft mailing list archive at Nabble.com. 
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft at mailman.qth.net 
>
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> Message delivered to tomb18 at videotron.ca