[Elecraft] K3 Eqalizer settings - another way

[Gary - NC3Z]

Cool idea Wolfgang, it works well for the KX3 too. Thanks.

Gary Mitchelson
NC3Z Davidsonville, MD FM18
NC3Z/4 Pamlico County, NC FM15
http://www.mitchelson.org/

On 10/2/2014 11:44, dl2ki wrote:
> Hi,
>
> when working with the "DS response string", i found an easier and faster
> method to read the values from the equalizer.
>
> If you select an AF-band in the RX/TX EQ menu, the set value appears briefly
> in the VFO-B display area.
> This value can be read out with the "DB command" then.
>
> The "SWTxx;" command and the "DB;" command must be carried out in quick
> succession.
>
> In the 'Elecraft K3 utility", you can for example run a macro"SWT34; DB;"
> and then receive the related response string.
>
> This note for general information.
>
> 73, Wolfgang
> DL2KI
>
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Eqalizer-settings-tp7593506p7593551.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nc3z.gary at gmail.com