[Elecraft] KPA500 with Icom 7100
Chad Wasinger
chadwasinger at outlook.com
Tue Nov 11 07:17:47 EST 2014
Thanks Olli and all that replied.
Makes for an easy decision!
> Date: Mon, 10 Nov 2014 23:10:33 +0100
> From: droese at necg.de
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KPA500 with Icom 7100
>
>
> Hi Chad,
>
> used an IC-7100 together with my KPA500 remotely for almost a year
> (before upgrading my remote station to 100% Elecraft, i.e. using a K3 +
> K3/0 nowadays). Worked like a charm. Did not do any special cabling
> except PTT and coax, the KPA500 takes care of the band changes
> automatically with it's RF sensor. The only "drawback" is you have to
> switch on the KPA500 using the KPA Utility software as there is no
> "switching signal" as the K3 can provide using a special macro. But I
> never had a problem with the KPA software doing the job except you need
> an own remoteable serial port for it.
>
> Hope that helps.
>
> 73, Olli - DH8BQA
>
> Contest, DX & radio projects: http://www.dh8bqa.de
>
>
> Am 10.11.2014 15:38, schrieb Chad Wasinger:
> > Hi Group,
> >
> > Has anyone successfully used the KPA500 with the Icom 7100? I use the Icom 7100 remotely and would like to throw some power behind it. With the KPA500's remote management software and capabilities, it is obviously first on my list.
> >
> > Just wondering if anyone has any tips or comments to the configuration. Specifically from a remote shack perspective.
> >
> > Thanks,
> > Chad
> > N0YK
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to droese at necg.de
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to chadwasinger at outlook.com
More information about the Elecraft
mailing list