[Elecraft] KPA500 with Icom 7100

Mike va3mw va3mw at portcredit.net
Mon Nov 10 17:15:50 EST 2014


I use my kpa500 remotely with my ts480 with only a ptt lead and no issues. You won't have an issue with your 7100. 

Mike va3mw 

> On Nov 10, 2014, at 5:10 PM, Oliver Dröse <droese at necg.de> wrote:
> 
> 
> Hi Chad,
> 
> used an IC-7100 together with my KPA500 remotely for almost a year (before upgrading my remote station to 100% Elecraft, i.e. using a K3 + K3/0 nowadays). Worked like a charm. Did not do any special cabling except PTT and coax, the KPA500 takes care of the band changes automatically with it's RF sensor. The only "drawback" is you have to switch on the KPA500 using the KPA Utility software as there is no "switching signal" as the K3 can provide using a special macro. But I never had a problem with the KPA software doing the job except you need an own remoteable serial port for it.
> 
> Hope that helps.
> 
> 73, Olli - DH8BQA
> 
> Contest, DX & radio projects: http://www.dh8bqa.de
> 
> 
> Am 10.11.2014 15:38, schrieb Chad Wasinger:
>> Hi Group,
>>  Has anyone successfully used the KPA500 with the Icom 7100? I use the Icom 7100 remotely and would like to throw some power behind it. With the KPA500's remote management software and capabilities, it is obviously first on my list.
>>  Just wondering if anyone has any tips or comments to the configuration. Specifically from a remote shack perspective.
>>  Thanks,
>> Chad
>> N0YK
>>                             
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to droese at necg.de
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net


More information about the Elecraft mailing list