[Elecraft] KX3 Questions

[George Fritkin via Elecraft]

Still being sold

George, W6GF

Sent from my iPad

> On Nov 1, 2014, at 5:17 AM, Charlie T, K3ICH <pincon at erols.com> wrote:
> 
> All the TE Systems amps I have that are rated for ten watts input will develop full, or very close to full rated power output with 3 watts drive.
> 
> 73, Charlie k3ICH
> 
> 
> ----- Original Message ----- From: "Jim Brown" <jim at audiosystemsgroup.com>
> To: <elecraft at mailman.qth.net>
> Sent: Saturday, November 01, 2014 2:06 AM
> Subject: Re: [Elecraft] KX3 Questions
> 
> 
>>> On 10/31/2014 9:19 AM, Phil Hystad wrote:
>>> But, if you are wanting to do weak signal work with CW, SSB, etc. then the 2M option is a very good cost item and worth the small increment of $.
>> 
>> Yes, IF you can find a good amp that drives with the 3W or so that the 2M transverter produces. There was an '80s vintage Mirage 2W In, 150W out brick that did that, and I have one (but there's no way I'd sell it). :)
>> 
>> 73, Jim K9YC
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to pincon at erols.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to georgefritkin at yahoo.com