[Elecraft] KX3 Questions

[Charlie T, K3ICH]

All the TE Systems amps I have that are rated for ten watts input will 
develop full, or very close to full rated power output with 3 watts drive.

73, Charlie k3ICH


----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: <elecraft at mailman.qth.net>
Sent: Saturday, November 01, 2014 2:06 AM
Subject: Re: [Elecraft] KX3 Questions


> On 10/31/2014 9:19 AM, Phil Hystad wrote:
>> But, if you are wanting to do weak signal work with CW, SSB, etc. then 
>> the 2M option is a very good cost item and worth the small increment of 
>> $.
>
> Yes, IF you can find a good amp that drives with the 3W or so that the 2M 
> transverter produces. There was an '80s vintage Mirage 2W In, 150W out 
> brick that did that, and I have one (but there's no way I'd sell it). :)
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pincon at erols.com