[Elecraft] OK... I give up on what is happening...

[Mike Flowers]

I also ran MixW and had similar problems with the K3.   I sent a lot of
information about this problem to the MixW authors, but there was no
response and no fix.  In fact, it's been years since there was a MixW
update.

So I chucked MixW and converted my digital operations to HRD - and that was
the end of those problems.

Not the solution for everyone, but now the HRD suite runs the operation
here.

- 73 and good DX de Mike, K6MKF, President - NCDXC, IDXC 2015, W6NAG, IDXG,
ADXG, RRC #933, K3-P3-KPA500-KAT500 Addict, Maui


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Rick
Bates, WA6NHC
Sent: Tuesday, November 04, 2014 7:33 AM
To: rs500
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] OK... I give up on what is happening...

Since it is running via a serial port, is it possible that the software is
overrunning the buffers?  Too much data, too fast?  If it were close, that
would certainly cause an issue that could require a reset of the system.

Rick, WA6NHC

PS It ain't pretty, but I'm doing the happy dance, Tromelin at LAST!

iPad = small keypad = typos = sorry ;-)

> On Nov 4, 2014, at 7:26 AM, rs500 <rs500cat at icloud.com> wrote:
> 
> Dave, you are not alone.  I have observed the same issue on my K3.  I 
> am running a Signalink and FLDigi.  Changing the Mode does seem to 
> reverse the direction on the waterfall but then I no longer trust the
frequency display.
> What I have found that consistently solves the problem (until the next
> occurrence) is using the K3 Utility program to restore a saved 
> configuration.  Unfortunately I need to close FLDigi in order for the 
> utility program to connect to the K3.
> I have not definitively identified a set of events that causes the 
> problem, but it seems reasonable that it is a communication problem on 
> the serial port.  I already have a variety of ferrite beads on the 
> serial port and other cables to the computer.  Good luck
> 
> Ron
> K2RAS
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/OK-I-give-up-on-what-is-happening
> -tp7594377p7594388.html Sent from the Elecraft mailing list archive at 
> Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> happymoosephoto at gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to mike.flowers at gmail.com