[Elecraft] OK... I give up on what is happening...

[Rick Bates, WA6NHC]

Since it is running via a serial port, is it possible that the software is overrunning the buffers?  Too much data, too fast?  If it were close, that would certainly cause an issue that could require a reset of the system.

Rick, WA6NHC

PS It ain't pretty, but I'm doing the happy dance, Tromelin at LAST!

iPad = small keypad = typos = sorry ;-)

> On Nov 4, 2014, at 7:26 AM, rs500 <rs500cat at icloud.com> wrote:
> 
> Dave, you are not alone.  I have observed the same issue on my K3.  I am
> running a Signalink and FLDigi.  Changing the Mode does seem to reverse the
> direction on the waterfall but then I no longer trust the frequency display.  
> What I have found that consistently solves the problem (until the next
> occurrence) is using the K3 Utility program to restore a saved
> configuration.  Unfortunately I need to close FLDigi in order for the
> utility program to connect to the K3.
> I have not definitively identified a set of events that causes the problem,
> but it seems reasonable that it is a communication problem on the serial
> port.  I already have a variety of ferrite beads on the serial port and
> other cables to the computer.  Good luck
> 
> Ron
> K2RAS
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/OK-I-give-up-on-what-is-happening-tp7594377p7594388.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to happymoosephoto at gmail.com