[Elecraft] on PSK the ALC bar setting is no longer stable -- ideas why?

[Walter Underwood]

Compression should not matter, because that is disabled in DATA A mode.

I'd save the config, EEINIT, and reload. If that doesn't fix it, ask support at elecraft.com

wunder
K6WRU
http://observer.wunderwood.org/

On May 24, 2014, at 6:48 AM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Julie,
> 
> Check to be certain Compression is set to zero.
> If it was not set to zero, you should also re-adjust the audio level (either with the computer soundcard level settings or the KX3 Mic Gain).
> 
> 73,
> Don W3FPR
> 
> On 5/24/2014 9:28 AM, jsdroyster at nc.rr.com wrote:
>> Hello to all!  Our KX3 that Larry uses for PSK has mysteriously developed an unstable ALC bar setting.
>> If we use the mic gain to set it for 4 bars while transmitting, then on the next transmission, without our having touched any controls, it goes back up to 6 or 7 bars.
>> Any ideas what could have changed to make this happen?
>> We must have inadvertently changed something but I don't know what.
>> THANKS!
>> Julie KT4JR and Larry K4MWE
>> ______________________________________________________________