[Elecraft] K3/10 with a KXPA100

[Bill Davis via Elecraft]

I use  the KXPA100 and tuner with my K3/10 ... happy, ATU software is still being fine tuned.

73  Bill  K0AWU



________________________________
 From: Don Wilhelm <w3fpr at embarqmail.com>
To: elecraft at mailman.qth.net 
Sent: Wednesday, May 21, 2014 9:53 AM
Subject: Re: [Elecraft] K3/10 with a KXPA100
 

The KXPA100 can be driven from most any QRP rig, so the answer is 
definitely 'Yes'.
Right now there is not a cable to fully integrate the K3 and the 
KXPA100, but my guess is that there may be in the future.
In the meantime, the KXPA100 can be used in its RF sensing mode with 
most any transceiver including the K3.

73,
Don W3FPR


On 5/21/2014 9:51 AM, Joshua Gould wrote:
> Greetings,
>
> I have a silly question (I guess the silliest one is the one not asked,
> though...) I'm planning on starting with a KX3, and then adding in the
> KXPA100 and KXAT100 at a later date.  If I already have the KXPA100 and
> KXAT100 and I decide to get a K3/10 later down the line, can I drive the
> KXPA100 from the K3?
>
> My brain is saying yes, it would just be a matter of the right cables
> hooked to the right spots to do so, but there is nothing in either manual
> about doing such a thing.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to cqbilld at yahoo.com