[Elecraft] K3/10 with a KXPA100

[Don Wilhelm]

The KXPA100 can be driven from most any QRP rig, so the answer is 
definitely 'Yes'.
Right now there is not a cable to fully integrate the K3 and the 
KXPA100, but my guess is that there may be in the future.
In the meantime, the KXPA100 can be used in its RF sensing mode with 
most any transceiver including the K3.

73,
Don W3FPR

On 5/21/2014 9:51 AM, Joshua Gould wrote:
> Greetings,
>
> I have a silly question (I guess the silliest one is the one not asked,
> though...) I'm planning on starting with a KX3, and then adding in the
> KXPA100 and KXAT100 at a later date.  If I already have the KXPA100 and
> KXAT100 and I decide to get a K3/10 later down the line, can I drive the
> KXPA100 from the K3?
>
> My brain is saying yes, it would just be a matter of the right cables
> hooked to the right spots to do so, but there is nothing in either manual
> about doing such a thing.
>
>