[Elecraft] K3: PSK31 will not allow Split operation

[Wes (N7WS)]

There's nothing to correct, split works fine on Data A.

Worked W1AW/0 on PSK63, split on the first call the other day.  My first PSK63 
QSO... I liked it, very snappy compared to the watching paint dry PSK31.

You do need to insure that the "B" vfo is on the same mode as the "A".  Double 
tap A->B to insure this.

Wes  N7WS

On 5/13/2014 10:51 PM, Richard Solomon wrote:
> Most, if not all radios I have seen, going split is NOT mode dependent.
> This should be corrected ASAP.
>
> 73, Dick, W1KSZ
>
>
> On 5/13/2014 7:40 PM, Scott via Elecraft wrote:
>> You can run split if you use a program like fldigi.  I worked WIAW/0 this 
>> afternoon this way.  I believe any program with a waterfall can run 
>> split--that is not the same as direct readout on the screen, but it is better 
>> than nothing.
>>
>> 73, Scott. AA0AA
>>
>> PSK31 SPLIT:
>>
>> Folks,
>>
>> It seems the solution is there is no solution. PSK31 SPLIT appears 
>> unsupported in the K3 and the KX3. The argument seems to be PSK31 is never 
>> used in SPLIT operation. But W1AW/* uses Split for pileups. And many 
>> DXpeditions have used it (T32C for instance). While I rarely use any digital 
>> mode other than CW, I thought it was nifty to have RTTY and PSK31 as part of 
>> the K3. Turns out it is near nifty. :)
>>
>> Ah, but maybe SPLIT for PSK31 is on on the list of things to come later? or 
>> have I missed something?
>>
>> ?Bob W1XT, Sun City West, Arizona