[Elecraft] K3: PSK31 will not allow Split operation

[Richard Solomon]

Most, if not all radios I have seen, going split is NOT mode dependent.
This should be corrected ASAP.

73, Dick, W1KSZ


On 5/13/2014 7:40 PM, Scott via Elecraft wrote:
> You can run split if you use a program like fldigi.  I worked WIAW/0 this afternoon this way.  I believe any program with a waterfall can run split--that is not the same as direct readout on the screen, but it is better than nothing.
>
> 73, Scott. AA0AA
>
> PSK31 SPLIT:
>
> Folks,
>
> It seems the solution is there is no solution. PSK31 SPLIT appears unsupported in the K3 and the KX3. The argument seems to be PSK31 is never used in SPLIT operation. But W1AW/* uses Split for pileups. And many DXpeditions have used it (T32C for instance). While I rarely use any digital mode other than CW, I thought it was nifty to have RTTY and PSK31 as part of the K3. Turns out it is near nifty. :)
>
> Ah, but maybe SPLIT for PSK31 is on on the list of things to come later? or have I missed something?
>
> ?Bob W1XT, Sun City West, Arizona
> Sent from Scott's iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w1ksz at earthlink.net
>