[Elecraft] Question about Data Modes...

[David Cole]

Thank you Jim!  Are you saying to use AFSK A for all sound card modes?
-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Tue, 2014-05-06 at 07:31 -0700, Jim Brown wrote:
> On 5/6/2014 7:19 AM, David Cole wrote:
> > However when I go to RTTY using MixW software on the same computer,
> > leaving the K3 in DATA MODE A, I get the oddest behavior..
> 
> Hi Dave,
> 
> Use AFSK and the Line Input for your setup.  DATA A is USB, RTTY is LSB. 
> Don't ask me why. :) Also, check that RTTY Baud rate is 45, and tone 
> frequency matches what you're doing with your RTTY software (most of us 
> use MMTTY)
> 
> 73, Jim K9YC
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net