[Elecraft] Question about Data Modes...

[Jim Brown]

On 5/6/2014 7:19 AM, David Cole wrote:
> However when I go to RTTY using MixW software on the same computer,
> leaving the K3 in DATA MODE A, I get the oddest behavior..

Hi Dave,

Use AFSK and the Line Input for your setup.  DATA A is USB, RTTY is LSB. 
Don't ask me why. :) Also, check that RTTY Baud rate is 45, and tone 
frequency matches what you're doing with your RTTY software (most of us 
use MMTTY)

73, Jim K9YC