[Elecraft] [P3] New Computer, P3 Utility Doesn't See P3
Cady, Fred
fcady at ece.montana.edu
Sat Mar 29 19:33:41 EDT 2014
Seems like the P3 utility would talk to the P3 directly but the usual serial connection is
Computer <===> P3 <===> K3. The P3 <==> K3 connection is needed so the P3 knows what band the K3 is on.
You then need two other serial port
Computer <==> KAT500
And
Computer <==> KPA500
Cheers and 73,
Fred KE7X
-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ian Kahn
Sent: Saturday, March 29, 2014 3:50 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] [P3] New Computer, P3 Utility Doesn't See P3
Recently I replaced the computer in my shack. When I did so, I moved the PCI serial board from the old computer to the new one. I then plugged my K-line into the same ports on the computer as I originally had them plugged into on the old computer (K3 into the integrated port, P3 and KPA500 into the same ports on the PCI board). I then downloaded and installed all the latest utilities. Each utility found its relevant system except for the P3 utility. The P3 is plugged into one of two possible ports in the port list in the P3 utility. On either port, all the utility does is scan through the various baud rates looking for the P3. The baud rate on the P3 is set to 38400, as are the physical port configurations in Device Manager on the PC. I verified the cables are all connected properly. I verified the ports work properly. During this whole endeavor I didn't change anything in the connections on my K-Line.
If anyone can make any suggestions as to what is causing this issue, I'd appreciate it. Thank you all in advance for the assistance.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik.ian at gmail.com
K3 #281, P3 #688, KPA500 #1468
HRD v5.x/6.0 Test Team
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to fcady at ece.montana.edu
More information about the Elecraft
mailing list