[Elecraft] Another K3-SignaLink question

[Tom Armour]

Thanks for asking and answering this question.  This was on my list of
things to figure out.

Tom - wa4ta


On Thu, Mar 27, 2014 at 3:53 PM, Joe Harris <joseph.a.harris at gmail.com>wrote:

> Ed,
>
> See page 20 of the K3 manual, in the Line Out setting. You can set the Line
> Out level in Config, or it can be set to =PHONES, which is what it sounds
> like you have it set to.
>
> 73,
> Joe, N1QD
>
>
> On Thu, Mar 27, 2014 at 3:09 PM, Edward F. Steinfeld <
> edward at go-embedded.com
> > wrote:
>
> > I have just connected my SignaLink to the K3 using SignaLink supplied K3
> > cables. I find the Line Out amplitude varies according to where I have
> the
> > AF control set. I would have thought that Line Out was a constant signal
> > level. Without setting the AF level quite high I do not get good PSK
> > reception. At those levels it is too loud for my ham shack (and my wife).
> > What I have I set wrong?
> >
> > Ed  --  KB1ZJK
> >
> > Edward F. Steinfeld
> > 25 Arbor Glen Drive
> > Stow, MA 01775-1258
> > Home: (978)897-3127
> > Cell: (978)376-3146
> > mailto::edward at go-embedded.com
> > http://www.go-embedded.com <http://www.go-embedded.com/>
> > http://en.wikipedia.org/wiki/Mount_Steinfeld
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to joseph.a.harris at gmail.com
> >
>
>
>
> --
> Joe Harris, N1QD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tom.armour at gmail.com
>