[Elecraft] Setup Help

[Keith Heimbold]

Richard,

I run the expert amp 1K FA with the K3. I run the KAT3 in bypass mode 100% of the time.  I also use the amp barefoot sometimes through the amplifier using its antenna tuner in line. 

I am not completely clear on your line of questioning but feel free to contact me offline. 

73,

Keith
AK6ZZ

Sent from my iPhone please excuse typos

> On Mar 10, 2014, at 9:40 AM, "Richard Thorpe" <kissov at me.com> wrote:
> 
> I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W on each band to drive the Expert to full output. A lot of times I don’t want to turn on the amp and use the K3 “barefoot” at 100W with the ATU switched in. What is the simplest way to do this? I need to change the K3 power out for each band, switch the antenna, switch in the ATU. Is there some simple way to do this? Any suggestions would be appreciated.
> 
> K6CG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html